Table of Contents
Advertisement
Note
the default NTSC signal; Hong Kong and most European countries use the PAL signal.
If you require the PAL setting, use the Advanced CMOS Setup section of the BIOS
Setup Utility to change the setting.
The NEC Versa does not support the SECAM signals used in some countries.
External Audio Options
The NEC Versa comes equipped with built-in audio ports that let you record and play
sound.
Connect audio jacks, like a microphone, headphones, or external speakers to the audio
ports as follows. The headphone/external speaker port supports SP/DIF.
Locate the audio port that you want to use.
1.
2.
Plug the jack into the appropriate port on the right side of the NEC Versa.
A – Volume Control
B – Headphones/External Speakers
Note
sound distortion or feedback, lower the volume.
Some feedback is caused by having the microphone and speakers too close to each
other, so moving the external audio option away from the unit may also help.
8-8 Using External Devices
The default TV Out setting is for NTSC transmission. The U.S. and Japan use
Audio options
If you are using external speakers or an external microphone and experience
C – Line-in
D – External Microphone
Advertisement
Table of Contents
