Table of Contents
Advertisement
In Windows 2000, select the Hardware tab and then the Device Manager. In
3.
Windows 98, select the Device Manager tab.
Locate and open the CD-ROM folder.
4.
Highlight the appropriate CD-ROM line.
5.
6.
Press the Properties button at the bottom of the window and select the Settings tab.
7.
Proceed as follows:
!
!
8.
Select OK twice to accept the settings in the Settings tab and exit the Properties
window.
To activate the new setting, reboot the system when prompted.
9.
CD Read/Write Drive
Your NEC Versa may ship with a CD-Read/Write drive with Easy CD Creator that
features the latest in CD-ROM technology. Use the CD Read/Write drive to load and
start programs from a compact disc (CD) or to play your audio CDs. The CD
Read/Write drive is fully compatible with Kodak Multisession Photo CDs™ and
standard audio CDs.
In addition, the Easy CD Creator application allows you to write information to a CD
and backup information from your hard disk drive to a CD. For detailed information
about using the CD Read/Write drive and installing the Easy CD Creator, refer to the
accessory sheet that ships with your system.
To enable Auto Play, click to add a check mark next to the line "Auto insert
notification."
To disable Auto Play, click to remove the check mark next to the line "Auto
insert notification."
Using the System Drives and Bays 5-11
Advertisement
Table of Contents
