Table of Contents
Advertisement
AC Adapter
Use the AC adapter and power cable that came with your NEC Versa to run your
computer on alternating current (AC) power, or to recharge the battery pack. Use the
AC adapter whenever a wall outlet is nearby.
Keep the adapter connected whenever possible. The AC adapter charges the battery
when it is connected, whether the NEC Versa is powered on or off.
A – AC Adapter
B – AC Adapter Cable
adapter has no user-replaceable or serviceable parts inside. Dangerous voltage in the
AC adapter can cause serious personal injury or death. The AC adapter is intended for
use with a computer and must meet EN609050 standards.
Connecting the AC Adapter
Note
where you are using it. Contact the local dealer to purchase the correct power cable.
Connect the AC adapter as follows:
Connect the AC adapter cable to the power port on the back of your NEC Versa.
1.
Plug one end of the AC power cable into the AC adapter and the other end into a
2.
properly grounded 120- or 240-volt wall outlet.
2-4 Getting Started
AC Adapter
Do not attempt to disassemble the AC adapter. The AC
The AC power cable type that your system uses depends on the country
C – Power Cable
Advertisement
Table of Contents
