Table of Contents
Advertisement
Follow these steps to connect your television as an external display device.
Connect one of the following cables:
1.
Connect one end of the standard composite cable into the TV Out (RCA)
!
yellow-colored port on your NEC Versa and the other end of the cable into the
standard RCA jack on your television or VCR.
Connect one end of the S-video cable into the TV Out (S-video) port on your
!
NEC Versa and the other end of the cable into the S-video input jack on your
television.
2.
Go to Settings, Control Panel, Display, Settings, and click the Advanced button
(Windows 2000/98) or Settings, Control Panel, Display (Windows NT).
Select the S3DuoVue tab, place a check in the TV box, and click OK.
3.
Your settings will be tested and the screen may go blank for a moment.
4.
Click Yes to save the new settings and click OK to close the S3 Properties
window.
Click OK to close the Display Properties window and close the Control Panel.
5.
Use
to toggle to TV Out display mode.
6.
Fn-F3
Connecting an external display device
Using External Devices 8-7
Advertisement
Table of Contents
