Table of Contents
Advertisement
6.
Replace the new drive as follows:
!
!
!
!
5-16 Using the System Drives and Bays
Holding the drive by its sides, pull up the hard drive lever.
Keeping the lever raised, lower the new drive into the drive bay.
Lowering the drive into the bay
Align the drive connector with the connector in the drive bay.
Pressing against the outer edge of the lever, slide the drive toward the
connectors and push firmly to secure the connection. Do not apply pressure to
the drive surface as you push.
Connecting the drive
A – Drive Connectors
Advertisement
Table of Contents
