Software Use - NEC VERSA MEDIADOCK Service Manual

n
The first audio screen tells you to close any applications that are running. If
you followed the instructions given here, you already closed open applica-
tions. Just click "Continue" to proceed.
If you did not follow these instructions, click "Exit." Go back to the beginning
of this section, "MediaDock Setup Utility," and start over.
8. When prompted, select installation operations in the following order.
n
Driver installation
Click the "Driver Installation" button.
At the prompt, select "Automatic Board Configuration."
At the next prompt, click the "Install Software" button to install the audio
software.
n
Software installation
Press
loading the audio software.
Press
Choose "Complete Installation" for the type of installation to follow.
At the prompt, insert Audio Applications diskette 2 into the drive and press
Enter
9. At the prompt, click "Restart Windows" to reboot Windows (this activates the
MediaDock audio).
10. Exit Windows and press the Power button to reboot the system and activate the
CD-ROM drivers.
See the following sections for operation information.
11.
n
See "MediaDock Setup Software" for information about using MediaDock
software.
n
See "CD-ROM Use" for information about using CDs in the MediaDock.

Software Use

This section describes how to use the software that the MediaDock Setup utility loads in the
Versa.
n
At start up, the Versa lets you choose a configuration to use. See "Choosing a
Configuration" for instructions.
n
Versa M users can use either the MediaDock sound system or the Versa sound
system. See "Using the Audio Switcher Utility" later in this section for more in-
formation.
Enter or click "OK" to accept the default directory PCAUDIO for
again to create the directory.
Enter
.
Setup and Operation 2-15