Choosing A Configuration; Using The Audio Switcher Utility - NEC VERSA MEDIADOCK Service Manual

2-16 Setup and Operation
n
Some programs run from MS-DOS instead of Windows. Use the information un-
der "Using DOS-Based Programs" to enable and control MediaDock sound from
MS-DOS applications.

Choosing a Configuration

After setting up the MediaDock software, your Versa boot-up differs from its original pro-
cedure. The new boot up sequence lets you choose which configuration to use.
Use the new boot up procedure as follows:
1. Power on the Versa. A menu similar to the following is displayed.
2. Enter the appropriate number for the configuration you want to use as follows:
n
MediaDock — Use this configuration when you dock the Versa on the Medi-
aDock.
n
Mobile — Use this configuration to use the Versa by itself.
n
Docked — Pick this configuration to use the Versa docked on an NEC
Docking Station or NEC Docking Station II. (This option may not appear,
depending on your system configuration.)

Using the Audio Switcher Utility

Follow these steps to use the Versa M Audio Switcher utility.
1. From the Windows Program Manager, double click on the Versa M Audio
Switcher Utility program group.
1. MEDIADOCK
2. MOBILE
3. DOCKED
NOTE: If the MediaDock sound system is se-
lected and the Versa is not docked, run this util-
ity to switch to the Versa M sound system.
To select the MediaDock sound system, make
sure the Versa is docked and power is on.