Modifying The Autoexec.bat File - NEC VERSA MEDIADOCK Service Manual

n
Specify the default configuration and how many seconds the system waits be-
fore using it.
"menudefault" specifies the default configura-tion, which is Mobile. Specify
the MediaDock configuration by replacing "Mobile" with "MediaDock".
"15" defines how many seconds elapse before the system activates the de-
fault configuration. Fifteen seconds gives you time to select between con-
figurations when the system boots up.
The menu section created should look similar to the following:
Create a MediaDock and Mobile section by typing the following and pressing
4.
after each.
ter
5. Press to access the file menu, then
Alt-f
save now.
Appendix B contains a sample CONFIG.SYS file.

Modifying the AUTOEXEC.BAT File

The MediaDock Setup utility also locates labels in the AUTOEXEC.BAT file and loads in-
formation below the label.
Once this procedure is completed, the AUTOEXEC.BAT file contents should look similar
to the following. Bold text represents the material entered during this procedure.
MENUDEFAULT=MOBILE,15
[MENU]
MENUITEM=MOBILE, Mobile Configuration
MENUITEM=MEDIADOCK, MediaDock Configuration
MENUDEFAULT=MOBILE,15
[MEDIADOCK]
[MOBILE]
@ECHO OFF
PROMPT $p$g
SET PATH=c: \DOS;C:\WINDOWS;C:\NECUTILS;C:\CRYSTAL
SET TEMP=C:\TEMP
IF NOT EXIST VERSION. GOTO SETUP
CLS
TYPE VERSION
:SETUP
C:\DOS\SMARTDRV.EXE
LOADHIGH C:\DOS\DOSKEY
Software Setup for Customized Disks
and . At the prompt, press
x y
A-3
En-
to
Enter