Assembly Handle, Right Latch, Left Latch; Removing Assembly Handle Screws - NEC VERSA MEDIADOCK Service Manual

4-16 Troubleshooting and Repair

Assembly Handle, Right Latch, Left Latch

Remove the MediaDock handle as follows.
1. Remove the top cover assembly as previously described.
Remove the two screws that secure the assembly handle to the chassis. Lift the
2.
handle up, and remove it.
Figure Section 4-8 Removing Assembly Handle Screws
Remove the right and left latches situated near the assembly handle as follows.
NOTE: When removing the latches, handle the
torsion springs very carefully.