HP Vectra Technical Reference Manual page 204

Table 5.25 defines the HP-HIL command and approximate delay before repeat value used for
each of the HP8041 delay possibilities. This table assumes an HP-HIL poll rate of 60 cycles per
second.
".. Table 5.25
Typematic Delay (oversion
HP8041 Cursor Pad Non-cursor Pad
Delay HP-HIL
Delay HP-HIL Delay
'dd' Command Period Command Period
OOb
04H
0.283 02H 0.283
01b
07H
0.483 04H 0.550
10b
OCH
0.817 06H 0.817
11 b
OEH
0.950 07H 0.950
Table 5.26 defines the HP-HIL command and approximate typematic rate value used for each of
the HP8041 typematic rate possibilities. This table assumes an HP-HIL poll rate of 60 cycles per
second.
Table 5.26
Typematic Repeat Rate Conversion
HP8041 Cursor Pad Non-cursor pad
Typematic HP-HIL Typematic
HP-HIL Typematic
Rate'm' Command Rate
Command Rate
OOOb 01H 30.00/sec 01H 30.00/sec
001b 02H 20.00/sec 02H
20.00/sec
010b 03H 1S.00/sec 03H 1S.00/sec
011b OSH 10.00/sec OSH 10.00/sec
100b 07H 7.S0/sec 07H 7.S0/sec
101b 09H 6.00/sec 09H 6.00/sec
110b OSH S.OO/sec OSH
S.OO/sec
111 b OEH 4.00/sec OEH 4.00/sec
Keyboard 195