HP Vectra Technical Reference Manual page 182

On Entry: AH
=
F_ISR (DOH)
BH
=
Keyboard state (only if state bit set in type)
BL
=
Scancode
DH
=
Scancode type (T_KC_HP_CCP
=
ODH)
DL
=
Source vector address / 6
BP
=
V_CCPCUR (008AH)
On Exit: AH
=
Return Status Code
BH
=
New keyboard state (only if state bit set in type)
BL
=
Translated scancode
DH
=
New scancode type (T_KC_IBM_PC
=
OAH)
Registers Altered: AX, BX, DH, BP, DS
SF_VERSION_DESC (AX
=
0206H)
This subfunction returns the release date code and a double word pointer to the current version
number. The date code consists of two BCD coded bytes containing the year and week of
release. The BL register contains the number of years since 1960 and the BH register contains the
week of the year.
On Entry: AH
=
F_SYSTEM (02H)
AL
=
SF_VERSION_DESC (06H)
BP
=
V_CCPCUR (008AH)
On Exit: AH
=
Return Status Code
BX
=
Release date code
CX
=
Number of bytes in current version number
ES:DI
=
Pointer to the current version number
Registers Altered: AX, BX, CX, DI, ES, BP, DS
5.3.4.10 V_SKEY2FKEY (BP = 00A8H)
The V_SKEY2FKEY service translates HP Softkey scancodes into their industry standard function
key equivalents. The driver makes no attempt to verify that the scancode passed is in the range
for an HP Softkey.
F _ISR (AH
=
OOH)
This function translates the scancode, sets the Data Type to T_KC_IBM_PC and returns.
Keyboard 173