HP Vectra Technical Reference Manual page 161

F16_GET--ATIR (AX
=
6F02H)
This subfunction reports the current typematic rate and delay values for the keyboard. A pointer
to a four byte buffer is returned. The bytes in the buffer are interpreted as shown in table 5.7
and 5.8.
On Entry: AX
=
F16_GET~nR
(6F02H)
On Exit: AH
=
OOH (Successful operation)
ES:SI
=
Pointer to buffer
CX
=
4 (Number of entries in table)
Registers Altered: AX, CX, SI, ES
F16_SET--ATIR (AX
=
6F03H)
This subfunction sets the current typematic rate and delay values for the keyboard. A pointer to a
four byte buffer is passed. The bytes in the buffer are interpreted as shown in table 5.7 and 5.8.
On Entry: AX
=
F16_SET~nR
(6F03H)
ES:SI
=
Pointer to buffer
On Exit: AH
=
OOH (Successful operation)
Registers Altered: AX
F16_DEF_MAPPING (AX
=
6F04H)
This subfunction reports the default keyboard translator mappings. A pointer to a buffer of 1EH
bytes is supplied by the caller to be filled in by the ROM-BIOS. The table will contain the default
HP_VECTOLTABLE entries for each of the five translator drivers. Each of five entries in the
table will contain the IP, CS, and DS for each translator driver.
Caution
An application should restore the translator drivers to their original condition upon
termination. If an application replaces one of these drivers it should be aware that
STD-BIOS keyboard driver functions 6F07H may no longer function properly.
The format of the buffer is given in table 5.9.
152 Keyboa
rd