Mounting Ext3-U3-T/R - Kramer EXT3-U3-T User Manual

Mounting EXT3-U3-T/R

This section provides instructions for mounting EXT3-U3-T/R. Before installing, verify that the
environment is within the recommended range:
• Operation temperature – 0° to 40°C (32 to 104°F).
• Storage temperature – -40° to +70°C (-40 to +158°F).
• Humidity – 10% to 90%, RHL non-condensing.
Caution:
• Mount EXT3-U3-T/R before connecting any cables or power.
Warning:
• Ensure that the environment (e.g., maximum ambient temperature & air flow) is
compatible for the device.
• Avoid uneven mechanical loading.
• Appropriate consideration of equipment nameplate ratings should be used for avoiding
overloading of the circuits.
• Reliable earthing of rack-mounted equipment should be maintained.
• Maximum mounting height for the device is 2 meters.
Mount EXT3-U3-T/R in a rack:
Use the recommended rack adapter
•
(see www.kramerav.com/product/EXT3-U3-T/R).
Mount EXT3-U-KIT on a surface using one of the following
methods:
Attach the rubber feet and place the unit on a flat surface.
•
• Fasten a bracket (included) on each side of the unit and attach it to a flat
surface.
Mount the unit in a rack using the recommended rack adapter.
•
• For more information go to (see
U3-T / www.kramerav.com/downloads/EXT3-U3-R).
EXT3-U3-T/R – Mounting EXT3-U3-T/R
www.kramerav.com/downloads/EXT3-
Kramer Electronics Ltd.
6