Tools And Materials Required - Profile Design ASC PRO Manual

ASC PRO Aerobar
INTRODUCTION
Thank you for purchasing this set of Profile Design Aerobar Extensions. These instructions apply to the ASC Pro in 325mm, 350mm and 375mm.
Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's
warranty policy. If you are not familiar with installation of Aerobars or their accessories, please seek the assistance of your local Profile design dealer
by logging on to www.profile-design.com and using "dealer search" or by calling Profile Design's customer service number p.# 888.800.5999.
Note to Dealers: If you install this product for the consumer, please provide him/her with this owner's manual after installation.

Tools and materials required:

• Assembly compound such as Finishline Fiber Grip™
• Grease
• Electrical/Insulation tape
• 5mm Hex key
• 4mm Hex key
• Torque wrench with 5mm & 4mm hex bits
1