Included Parts - Profile Design ASC PRO Manual

Included Parts:

When ordering the ASC Pro system you need to choose your required options for the following:
• Extension kit
• Bracket kit
• Wedge kit
If you have ordered the pre-packaged ASC Pro system each of the three kits is included.
The contents of each kit are listed below
ASC PRO 43 Aerobar Extensions
• One (1) Extension – ASC PRO left side
• One (1) Extension – ASC PRO right side
• One (1) Pad - Left side elbow
• One (1) Pad - Right side elbow
• One (1) Pad - Left side forearm
• One (1) Pad - right side forearm
• One (1) Bracket -Left side 15 mm offset
• One (1) Bracket -Right side 15 mm offset
• Two (2) Switch adaptors
• Four (4) Bolts - M6x16mm
• Two (2) Barrel - NORMAL
• Two (2) Barrel - CUT
• Four (4) Washers
Note that riser bolts are not included with the ASC Pro kits. These can be ordered individually or as part of the A3 Riser kits.
ASC PRO Aerobar Bracket Kit - offset 5mm
• One (1) Bracket -Left side 5 mm offset
• One (1) Bracket -Right side 5 mm offset
• Four (4) Bolts - M6x16mm
• Two (2) Barrel - NORMAL
• Two (2) Barrel - CUT
• Four (4) Washer
ASC PRO Aerobar Wedges (positive or negative)
• Two (2) 1° aluminium wedges
• Two (2) 2° aluminium wedges
• Two (2) 3° aluminium wedges
• Two (2) 4° aluminium wedges
• Two (2) 5° aluminium wedges
ASC PRO Aerobar
2