Page 2
Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's warranty policy. If you are not familiar with installation of Aerobars or their accessories, please seek the assistance of your local Profile design dealer by logging on to www.profile-design.com and using "dealer search"...
Page 3
If anything is missing from the bracket kit please contact your dealer. Please note that threaded areas have been pre-treated by Profile Design during production with a special blue thread locking compound. This special compound is easy to detect on the threads of all bolts provided. If you cannot detect this thread locking compound or you are re-installing the bolt, re-apply a suitable thread locking compound as available from Loctite®...
Page 4
Aeria Ultimate Race Bracket COMPONENT LIST QTY. Part.# Ref.# Part Description Req. 189382 Bracket - Aeria Ult Race Top Bracket DM Alloy Anodized Black L (w/Assembling Indicator Mark) 189383 Bracket - Aeria Ult Race Top Bracket DM Alloy Anodized Black R (w/Assembling Indicator Mark)
Page 5
Aeria Ultimate Race Bracket PART DRAWINGS 27 mm...
Page 6
Aeria Ultimate Race Bracket PRODUCT SPECIFIC SETUP LIMITATIONS max length 35 mm 85 mm...
Page 9
Aeria Ultimate Race Bracket BOLT LENGTHS Aerobar Stack Spacer Height Bolt Length Spacers Used Ergo / Race Ergo / Race (mm) (mm) 10mm The Bridge should be used 5, 10 for spacer heights above 40mm 5, 20 Height over 40mm...
Page 10
Aeria Ultimate Race Bracket 1. Assemble the bracket and risers. a) Assembly tip – it is usually easier to start with the bolt at the front of the bracket. b) Use the locator groove on the side of the threaded barrel (in the aerobar bracket) to aid in aligned the barrel for bolt installation.
Page 11
Aeria Ultimate Race Bracket 4. Install the shifters as per the shifter manufacturer’s instructions. We recommend a light coating of assembly compound on the inside of the extension prior to installing the shifter. 5. Install the cables as per instructions from the shifter manufacturer.
Page 12
Aeria Ultimate Race Bracket 8. Fasten the armrests to the brackets using the M6x12mm countersunk bolts, note that the armrests have an offset design so care is required to ensure each side is positioned in the same way. 9. Apply a light coating of grease to the surface of the bolts as a protective layer against the effects of sweat.
Page 13
Aeria Ultimate Race Bracket HOW TO INSTALL NEW ARMRESTS 1. To fit the armrests first ensure the inner face of the armrest is free of lint and grease, if the armrest has previously had a hook and loop sticker applied the residue should first be removed either mechanically or with a citrus based solvent.
Page 14
Aeria Ultimate Race Bracket ARMREST USAGE WARNING Do not put force on the side of the armrests!
Page 15
• Profile Design Worldwide Two Year Limited Warranty. • Profile Design, LLC (distributor) warrants to the original retail purchaser ("you") that the Profile Design product for which you received this warranty is free from defects in material and workmanship for (2) two years from the date of original retail purchase. For more details on this warranty, its exclusions and/or how to make a claim under the warranty please call +1 310.747.0085 extension 161 or visit...