Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's warranty policy. If you are not familiar with installation of Aerobars or their accessories, please seek the assistance of your local Profile design dealer by logging on to www.profile-design.com and using "dealer search"...
Page 3
Tri Stem Optional accessories compatible with this stem: • Any Profile Design Basebar or Handlebar • HSF Aeria Bottle • HSF Aeroflow Bottle If anything is missing from the Stem kit please contact your dealer. WARNING: Periodically check the stem for damage that could lead to degradation and weakening of the base material. Replace your stem if you...
Tri Stem INSTALLATION INSTRUCTIONS Externally routed headset 1. Install the stem on the fork steerer. • Ensure the top of the steerer tube is level with or up to 2mm above the top of the stem clamp. • Fit the included compression cap.
Page 9
Tri Stem INSTALLATION INSTRUCTIONS Internally routed headset 1. Route the brake and gear cables through the frame and out of the headset cap. 2. Install the stem on the fork steerer. • As you install the stem guide the cables through the two slots in the stem and out through the bar clamp area.
• Profile Design Worldwide Two Year Limited Warranty. • Profile Design, LLC (distributor) warrants to the original retail purchaser ("you") that the Profile Design product for which you received this warranty is free from defects in material and workmanship for (2) two years from the date of original retail purchase. For more details on this warranty, its exclusions and/or how to make a claim under the warranty please call +1 310.747.0085 extension 161 or visit...