Tools And Materials Required - Profile Design RZ3 Quick Start Manual

RZ3 Drink Bottle Cage
INTRODUCTION
Thank you for purchasing this Profile Design Drink Bottle Cage. These instructions apply to the RZ3.
Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's
warranty policy. If you are not familiar with installation of bicycle accessories, please seek the assistance of your local Profile design dealer by logging
on to www.profile-design.com and using "dealer search" or by calling Profile Design's customer service number p.# 888.800.5999.
Note to Dealers: If you install this product for the consumer, please provide him/her with this owner's manual after installation.

Tools and materials required:

• Grease such as Finishline Premium Grease
• Screwdriver
Your Drink Bottle Cage kit should contain:
• HSF 880 Bottle with top cap
• Straw with bite valve
• Aerodrink BTA bracket
If anything is missing from the bottle kit please contact your dealer.
WARNING: Periodically check the Cage for damage, particularly for cracks or scratches in the surface that could lead to degradation and weakening
of the base material. Replace your Aerobar if you notice any damage from use or accident.
1