Table of Contents
Advertisement
Extensions
INTRODUCTION
Thank you for purchasing this set of Profile Design Aerobar Extensions. These instructions apply to the 35SLC, 43SLC, 4525SLC, 50SLC, 35A, 43A,
4525A, 50A.
Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's
warranty policy. If you are not familiar with installation of Aerobars or their accessories, please seek the assistance of your local Profile design dealer
by logging on to www.profile-design.com and using "dealer search" or by calling Profile Design's customer service number p.# 888.800.5999.
Note to Dealers: If you install this product for the consumer, please provide him/her with this owner's manual after installation.
Tools and materials required:
• Assembly compound such as Finish Line Fiber Grip™
• Cutting guide
• Hacksaw with a 32T blade for Carbon Extensions
• Hacksaw with a 18T blade for Aluminum Extensions
• Half round file
• Electrical/Insulation tape
• Clean, lint free cloth
1
Advertisement
Table of Contents
