Hinge Cover; Removing The Hinge Cover - Dell LATITUDE XT2 XFR Service Manual

3. Hold the bracket down and tighten the four captive screws.

4.2 Hinge Cover

WARNING: Before working inside your XT2 XFR, read the safety information that
shipped with your XT2 XFR. For additional safety best practices information, see the
Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
4.2.1

Removing the Hinge Cover

1. Follow the procedures in
2. Remove the battery
3. Loosen the four captive screws securing the hinge cover in place.
4. Use your fingers to release the rest of the hinge cover by pulling up slightly and remove from
the XT2 XFR.
Page 30 of 94
™
Dell Latitude™ XT2 XFR Service Manual
Before Working Inside Your XT2
from the XT2 XFR.
XFR.
Version A00-01