Dell LATITUDE XT2 XFR Service Manual page 46

3. Ensure the ribbon cable for the touch pad can be seen through the palm rest door, then place
the palm rest over the chassis so the view through the door is over the touchpad connector.
Insert the touch pad cable into the connector and close the lock tab.
4. Lift the palm rest slightly and set it into position over the edge gaskets and press on the palm
rest front edge to lock the palm rest into place.
5. Install the screw on the right side of the keyboard valley.
Page 46 of 94
™
Dell Latitude™ XT2 XFR Service Manual
Version A00-01