Placing two fingers on the screen and moving them horizontally or vertically generates
scrolling in the direction of movement: right, left, up, or down.
Touching the screen with two fingers and moving them together or
apart generates a zoom-in or zoom-out command to the screen.
Tapping the screen twice with two fingers sends an operating system command that
you can configure. It can be used to perform actions, such as turning the display off
and disabling touch gestures (default), or run an executable program, such as one
that opens Internet Explorer.
To adjust the sensitivity for the two-finger gestures, double-click the N-trig icon (
tray, and tap the Multi-Touch Gestures tab. Set the sliders for each gesture as desired.
1.4.3.4
About Tab
The About tab is used to find information such as the driver version and firmware revision numbers.
The firmware revision number can also be obtained by hovering your pointer over the N-trig Tablet
Settings icon in the system tray.
Page 19 of 94
™
Dell
Latitude™ XT2 XFR Service Manual
Scroll Gesture
Zoom Gesture
Two-Fingers Double-Tap Gesture
Sensitivity Setup
) in the system
Version A00-01