Removing The Hinge Cover; Replacing The Hinge Cover - Dell Inspiron 9400 Service Manual

Back to Contents Page
Hinge Cover
Dell™ Inspiron™ 9400 Service Manual
Removing the Hinge Cover
Replacing the Hinge Cover
Removing the Hinge Cover
CAUTION:
NOTICE:
as the back panel) on the computer.
NOTICE:
computer.
NOTICE:
1. Follow the instructions in
NOTICE:
2. Open the display all the way (180 degrees) so that it lies flat against your work surface.
3. Using a small plastic scribe, insert the scribe on the right side to gently pry the hinge cover loose.
4. Pulling up from right to left, remove the hinge cover.
1
Replacing the Hinge Cover
With the display open all the way (180 degrees) so that it lies flat against the work surface, snap the cover back into place, starting from left to right.
Back to Contents Page
Great user manuals database on
Before you begin the following procedure, see the safety instructions in the Product Information Guide.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
To help prevent damage to the system board, remove the main battery (see
The hinge cover is fragile and can be damaged if extreme force is used. Be careful when removing the hinge cover.
Before Working Inside Your
To help avoid damage to the hinge cover, ensure that it is snapped securely into place before you rotate the display open to 180 degrees.
hinge cover
UserManuals.info
Before Working Inside Your
Computer.
Computer) before working inside the