Dell LATITUDE XT2 XFR Service Manual page 65

6. Set the three antenna cables from the display assembly within the memory door opening.
7. Place the grommet surrounding the cables into the grommet chamber. Be sure the grommet
is seated properly and hold in place.
8. Insert the cable bracket and install the two screws securing the bracket, cables and grommet
in place. Release the grommet once this has been completed.
9. Perform the steps for
Page 65 of 94
™
Dell Latitude™ XT2 XFR Service Manual
Installing the system board before continuing.
Version A00-01