Installing The Coin-Cell Battery; Usb Interface Board; Removing The Usb Interface Board - Dell LATITUDE XT2 XFR Service Manual

4.10.2

Installing the Coin-Cell Battery

1. Connect the coin-cell battery to the system board.
2. Place the tape side of the battery to the left of the chassis pad directly in front of the USB
connector location. DO NOT place battery on chassis pad.
3. Follow the procedures for
4.11

USB Interface Board

4.11.1

Removing the USB Interface Board

WARNING: Before working inside your XT2 XFR, read the safety information that
shipped with your XT2 XFR. For additional safety best practices information, see the
Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Page 49 of 94
™
Dell Latitude™ XT2 XFR Service Manual
Installing the palm rest.
Version A00-01