Main Menu - SMC Networks 6900FSC - annexe 5 Management Manual

W -B M
EB ASED ANAGEMENT

Main Menu

Using the on-board Web agent, you can define system parameters,
manage and control the switch and all its ports, or monitor
network conditions. The following table briefly describes the
selections available from this program.
Menu
System
Switch
IP
SNMP
Security
Upgrade
Address
Table
STA
Bridge
Extension
Priority
VLAN
IGMP
Port
Mirror
Trunk
Statistics
3-8
Description
Provides basic system description, including contact
information.
Shows hardware/firmware version numbers, power status,
and expansion modules in use.
Includes boot state, IP address, and the maximum number of
Telnet sessions allowed.
Configures communities, trap managers; and activates traps.
Sets password for system access.
Downloads new version of firmware to update your system.
Provides full listing of unicast addresses, sorted by address or
VLAN.
Enables Spanning Tree Algorithm; also sets parameters for
switch priority, hello time, maximum message age, and
forward delay; as well as port priority and path cost.
Displays/configures extended bridge capabilities for this
switch, including for traffic classes and VLAN extensions.
Configures default port priorities and displays queue
assignments.
Configures VLAN group members and other port-specific
VLAN settings.
Configures IGMP multicast filtering.
Enables any port, sets communication mode to
auto-negotiation, full duplex or half duplex, and enables/
disables flow control.
Sets the source and target ports for mirroring.
Specifies ports to group into aggregate trunks.
Displays statistics on network traffic passing through the
selected port.