Console Login Configuration - SMC Networks 6900FSC - annexe 5 Management Manual

Console Login Configuration

Use the Management Setup: Console Login Configuration to restrict
management access based on specified user names and
passwords, or to set the invalid password threshold and time-out.
There are only two user types defined, ADMIN (Administrator) and
GUEST, but up to five user names and passwords can be
configured. Only the Administrator has write access for parameters
governing the SNMP agent. You should therefore assign a user
name and password to the default Administrator as soon as
possible, and store it in a safe place. (If for some reason your
password is lost, or you cannot gain access to the System
Configuration Program, contact SMC Technical Support for
assistance.) The parameters shown on this screen are indicated in
the following figure and table.
<APPLY>
Use <TAB> or arrow keys to move, other keys to make changes.
U
SING THE
Console Login Configuration
===========================
Password Threshold
Lock-out Time (in minutes) : 0
User Type User Name
-----------------------------------
1. ADMIN
2. GUEST
3.
4.
5
<OK>
S C
YSTEM ONFIGURATION
: 3
Password
admin
guest
<CANCEL>
P
ROGRAM
2-21