SMC Networks 6900FSC - annexe 5 Management Manual page 29

Parameter
IP State
U
SING THE
Description
Specifies whether IP functionality is enabled via manual
configuration, or set by Boot Protocol (BOOTP).
Options include:
USER-CONFIG - IP functionality is enabled based on the
default or user specified IP Configuration. (This is the
default setting.)
BOOTP Get IP - IP is enabled but will not function until
a BOOTP reply has been received. BOOTP requests will
be periodically broadcast by the switch in an effort to
learn its IP address. (BOOTP values can include the IP
address, default gateway, and subnet mask.)
S C
YSTEM ONFIGURATION
P
ROGRAM
2-13