U
S
SING THE
YSTEM
Configuring IP Trap Managers
The following figure and table describe how to specify
management stations that will receive authentication failure
messages or other trap messages from the switch. Up to 5 trap
managers may be entered.
IP Address
1.
2.
3.
4.
5.
<APPLY>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter
IP Address
Community Name
Status
2-20
C
ONFIGURATION
SNMP Configuration : IP Trap Managers
=====================================
10.1.0.23
Description
IP address of the trap manager.
A community specified for trap management
access.
Sets administrative status of selected entry to
enabled or disabled.
P
ROGRAM
Community Name
Public
<OK>
Status
DISABLED
<CANCEL>