Factory Reset - LUNA OPTICS QUANTUM DIGITAL 2K Instruction Manual

How to view photos and videos stored on the Micro-SD card
Press and hold the controller (M) for 2 seconds to enter the main menu, then scroll down and select
Playback function. Select photo or video to view. Press controller (M) to play a video, press the
controller (M) again to stop playing. Press and hold the controller (M) for 2 seconds to exit the
Playback interface. You can also delete the playback files by pressing the Photo/Video button (6)
while in the playback mode and then follow the prompts on screen with Controller (M) to delete the
files.
Electronic image stabilizer (EIS) mode
Press and hold the controller (M) for 2 seconds to enter the main menu, scroll down to Settings,
then select EIS function, then select "On" and click Controller to activate it.
IMPORTANT: In EIS mode, the ability to change image magnification will be disabled.
During observation, the stabilizer icon is displayed on the bottom right of the screen. When the
viewed image is unstable, the icon is green and flickers. It means the electronic image stabilizer
function is actively working.
Due to the high magnification of this device, the EIS function only works effectively when there is a
small tremble or shake effect. The effect of EIS is not significant when there is a significant shake.
To exit EIS mode, follow the same procedure as in activation and select "Off".

Factory reset