Advertisement
display will show the calibration interface. Follow the calibration instructions. After calibration, the
electronic compass will show product horizontal angle, elevation angle / depression angle, and 360°
azimuth angle. When the device detects a weak signal during use, the calibration interface will
appear on the display again. If this happens, follow the instructions to recalibrate.
Picture-In-Picture
Press and hold the controller (M) for 2 seconds to enter the main menu, select Picture in Picture
function. There are three options for picture in picture location within the display: Low Left / Low
Middle / Low Right. When the picture in picture function is activated, it captures the center portion
of the screen and that part of the displayed image will be slightly magnified and shown in the lower
part of the image display, in the location of your choice.
Advertisement
Need help?
Do you have a question about the QUANTUM DIGITAL 2K and is the answer not in the manual?
Questions and answers