Intergraph StudioZ System Manual page 23

Starting SOFTIMAGE|DS
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTIMAGE|DS has already been installed on your computer's hard drive. To
start it, follow these steps:
To start SOFTIMAGE|DS
1. Turn on all the devices.
2. Log on to Windows NT.
When you log on for the first time, you can use a blank password. For
information on changing your password, refer to Managing User Accounts
on page 22.
3. Click the Start > Programs > SOFTIMAGE|DS > SOFTIMAGE|DS.
The Project dialog box is displayed.
4. Click New Project.
The New Project dialog box is displayed.
5. In the Project Name box, enter a name for your new project.
The SOFTIMAGE|DS Editing Layout is displayed by default.
You can now capture material and build your project. To find out the best
approach to learning SOFTIMAGE|DS, refer to the SOFTIMAGE|DS Road
Map.
You should create separate Windows NT user accounts so that each
Tip
SOFTIMAGE|DS user can save their own project preferences. See
Managing User Accounts on page 22.
System Guide
Starting SOFTIMAGE|DS
15