CAUTION
INSERT THE BULB INTO THE BULB
HOLDER, MAKING SURE THE REFER-
ENCE FITTINGS MATCH.
TAIL LIGHT BULBS
Remove the plastic cover (4)
with a screwdriver.
Hold the tail light bulb holder,
pull and take it out of its fitting.
Remove the tail light bulb (6)
and replace it with another of the
same type.
Check the proper insertion of
the bulb in the bulb holder.
04_20
Headlight adjustment (04_21,
04_22, 04_23)
NOTE
IN COMPLIANCE WITH LOCAL LEGIS-
LATION,
SPECIFIC
MUST BE FOLLOWED WHEN ALIGN-
ING THE LIGHTS.
04_21
136
LET OP
PLAATS HET LAMPJE IN DE LAMP-
HOUDER,
PLAATSINGSZITTEN TE DOEN OVER-
EENKOMEN.
LAMPJES VAN HET POSITIELICHT
Verwijder het dekseltje (4) met
behulp van een schroevendraai-
er.
Grijp de lamphouder van de po-
sitielichten vast, trek er aan, en
verwijder hem uit de zit.
Verwijder het positielampje (6)
en vervang het met één van het-
zelfde type.
Controleer de correcte plaatsing
van het lampje in de lamphou-
der.
Afstellen van de koplamp
(04_21, 04_22, 04_23)
N.B.
OP BASIS VAN WAT WORDT VOOR-
PROCEDURES
GESCHREVEN
KRACHT ZIJNDE WETGEVING IN HET
LAND VAN GEBRUIK VAN HET VOER-
TUIG, MOETEN ER VOOR DE CON-
TROLE VAN DE RICHTING VAN DE
DOOR
DE
SPECIALE
DOOR
DE
VAN