Checking The Switches; Vertical Adjustment Of The Headlight Beam - APRILIA SCARABEO 125 - 09 2006 Manual

CHECKING THE SWITCHES

The vehicle is fitted with two switches:
– Stoplight switch on the rear brake control
lever.
– Stoplight switch on the front brake control
lever.
If you need assistance or technical advice,
contact your aprilia Authorised Dealer,
for guaranteed accurate, prompt service.
VERTICAL ADJUSTMENT OF THE
HEADLIGHT BEAM
For a quick beam inspection, place the
vehicle on level ground, ten metres away
from a vertical wall.
Switch on the low beam, sit astride the
vehicle and make sure that the light spot
on the wall is just below the horizontal line
of the headlight (about nine/tenths of
overall height).
To adjust the headlight beam:
Remove the headlight fairing.
u
Turn the appropriate screw (1) with a
u
screwdriver.
TIGHTEN (clockwise) to raise the beam;
SLACKEN (anticlockwise) to lower the
beam.
use and maintenance Scarabeo 125 - Scarabeo 250
49