CHECKING THE SWITCHES
The vehicle is fitted with two switches:
√ Stoplight switch on the rear brake control
lever.
√ Stoplight switch on the front brake control
lever.
If you need assistance or technical advice,
contact your aprilia Authorised Dealer ,
for guaranteed accurate, prompt service.
use and maintenance SportCity 125 - 200
48
VERTICAL ADJUSTMENT OF THE
HEADLIGHT BEAM
For a quick beam inspection, place the ve-
hicle on level ground, ten metres away
from a vertical wall.
Switch on the low beam, sit astride the ve-
hicle and make sure that the light spot on
the wall is just below the horizontal line of
the headlight (about nine/tenths of overall
height).
1
To adjust the headlight beam:
Use a screwdriver to turn the screws (1)
◆
on the front wheelhouse.
TIGHTEN (clockwise) to raise the beam;
SLACKEN (anticlockwise) to lower the
beam.