ARRANGEMENT OF MAIN FUSES
(BATTERY COMPARTMENT)
√ 20-A fuse
From ignition switch to: ignition switch,
helmet compartment light.
√ 15 A fuse
From battery to: power socket.
use and maintenance Atlantic 125/250
58
VERTICAL ADJUSTMENT OF THE
HEADLIGHT BEAM
This is a quick beam inspection procedure.
Place the motorcycle ten metres away from
a vertical wall. It is important that the
motorcycle be on level ground.
Switch on the low beam and sit astride the
motorcycle. The light spot on the wall
should be just below the horizontal line of
the headlight (about nine/tenths of overall
height)
2
To set beam height:
◆
Open the glove compartment (1) and
press down gently on the side guides to
release.
◆
Remove the right and left protective
covers by pressing on the upper locking
tab.
◆
Turn the lower adjuster screws (2) of
both headlamp bulbs with a screwdriver
to adjust as follows:
turn clockwise to lower the beam;
turn anticlockwise to raise the beam.
1