Carefully read p. 69 (BULBS).
To change the bulb, proceed as follows:
N
Unscrew and remove the screw (1).
N
Remove the cover (2).
N
Extract the rubber bulb socket (3).
N
Withdraw the bulb from its seat.
N
Correctly install a new bulb, following the
reverse order.
72
use and maintenance Scarabeo 50 - Scarabeo 100
/
Carefully read p. 69 (BULBS).
CAUTION
To extract the bulb electric connector,
do not pull its electric wires.
N
Working on the lower inner side of the
mudguard, grasp the bulb socket (4), pull
it and extract it from its seat.
N
Withdraw the bulb (5) and replace it with
a new one of the same type.
NOTE
Upon reassembly, make sure
that the bulb socket (4) is correctly inserted
in its seat.
Carefully read p. 69 (BULBS) carefully.
The dashboard contains:
– The warning light bulbs;
– The dashboard lighting bulbs;
To change the bulbs, proceed as fol-
lows:
N
Remove the front handlebar cover, see
p. 58 (REMOVING THE FRONT HAN-
DLEBAR COVER).