APRILIA SCARABEO 100 - 1999 Manual page 21

NOTE
The electrical parts work only when the ignition switch
is in position " ".
NOTE
The lighting system works only when the motor is run-
ning.
1) LIGHT SWITCH ( -
NOTE
Before using the light switch, make sure that the
dimmer switch ( -
When the light switch is in position "
the switch is in position "
board light are on; when the switch is in position "
parking lights, the dashboard light and the low beam are on.
The high beam can be operated by means of the dimmer
switch ( - ).
2) START PUSH BUTTON ( )
When the start push button is pressed and one of the brake
levers (front or rear) is activated at the same time, the starter
makes the engine run.
For the starting procedure, see p. 34 (STARTING)..
•
- )
) is in position " ".
•
", the lights are off; when
", the parking lights and the dash-
", the
use and maintenance Scarabeo 50 - Scarabeo 100 21