NOTE
The electrical parts work only when the ignition switch
is in position " ".
NOTE
The lighting system works only when the motor is run-
ning.
•
1) LIGHT SWITCH (
-
)
NOTE
Before using the light switch, make sure that the
dimmer switch (
-
When the light switch is in position "
the light switch is in position "
dashboard lights and the low or high beam are on.
By means of the dimmer switch (
erate the low or high beam.
1a) DIMMER SWITCH (
When the dimmer switch is in position "
rear parking light and the dashboard lights are on; when the
dimmer switch in position "
ing light and the dashboard lights are on.
NOTE
The lights can be switched off only by stopping the
engine.
2) START PUSH BUTTON ( )
When the start push button is pressed and one of the brake
levers (front or rear) is activated at the same time, the starter
makes the engine run.
For the starting procedure, see p. 34 (STARTING).
) is in position "
".
•
", the lights are off; when
", the rear parking light, the
-
), it is possible to op-
-
)
", the low beam, the
", the high beam, the rear park-
use and maintenance Scarabeo 50 - Scarabeo 100
19