APRILIA SCARABEO 100 - 1999 Manual page 71

Carefully read p. 69 (BULBS).
N
Position the vehicle on the stand.
N
Unscrew and remove the screw (1).
NOTE
While removing the protection
screen, proceed carefully in order not to
break the cog.
N
Remove the protection screen (2).
NOTE
Upon reassembly, correctly posi-
tion the protection screen in its seat.
Tighten the screw (1) moderately and care-
fully, to avoid damaging the protection
screen.
N
Press the bulb (3) slightly and rotate it
anticlockwise.
N
Extract the bulb (3) from its seat.
NOTE
Insert the bulb in the bulb socket,
making the two bulb pins coincide with the
relevant guides on the socket.
N
Correctly install a new bulb of the same
type.
NOTE
If the bulb socket (4) goes out of
its seat, insert it correctly, making the bulb
socket opening coincide with the screw
seat.
Carefully read p. 69 (BULBS).
To change them, proceed as follows:
N
Unscrew and remove the two screws (5).
NOTE
While removing the protection
screen, proceed carefully in order not to
break the cog.
N
Remove the protection screen (6).
N
Press the bulb slightly and turn it anti-
clockwise.
N
Remove the bulb from its seat.
NOTE
Insert the bulb in the socket, mak-
ing the two bulb pins coincide with the rele-
vant guides on the socket.
N
Correctly install a new bulb of the same
type.
NOTE
Upon reassembly, position the
protection screen correctly in its seat.
Tighten the screws (1) moderately and
carefully, in order not to damage the pro-
tection screen.
use and maintenance Scarabeo 50 - Scarabeo 100 71