Carefully read p. 43 (MAINTENANCE).
N
Position the vehicle on the centre stand
on firm and level ground.
N
Unscrew and remove the two screws (1).
N
Unscrew and remove the two screws (2).
CAUTION
Proceed with care, in order not to dam-
age the seat (3) of the tang (4).
#
N
By means of a small-tipped screwdriv-
er, lift the tang (4) positioned inside the
front handlebar cover (5).
#
N
Repeat the operation described above
on the lower part of the handlebar cover.
58
use and maintenance Scarabeo 50 - Scarabeo 100
CAUTION
Handle the plastic and painted compo-
nents with care and avoid scraping or
damaging them.
N
Remove the front handlebar cover (5),
taking care not to break the tangs.
NOTE
Upon reassembly, make sure that
the tangs are correctly inserted.
Carefully read p. 43 (MAINTENANCE).
CAUTION
Handle the plastic and painted compo-
nents with care and avoid scraping or
damaging them.
N
Position the vehicle on the centre stand.
#
N
Unscrew and remove the screw (6).
N
Remove the inspection cover (7).