APRILIA RSV 1000 TUONO R Manual page 21

VIEW TIMES
VIEW TIMES
This function also displays the acquired lap
times. Briefly press the SET button (2) to
scroll the pages with the times measured;
press it for several seconds to set the
display to LAP TIME menu. If the battery is
disconnected, stored times are lost.
DELETE TIMES
This function deletes the acquired lap
times. Deletion should be confirmed. Once
the operation is over, the display goes
back to LAP TIMER menu.
Lap time operation
Select ENABLE LAP TIMER and confirm
(by pressing SET (2) button for several
seconds) and display top zone (A) is
automatically set for time recording. Briefly
press SET button (2) to start recording with
the lap timer.
Press again the SET button (2) within the
first 10 seconds from when the timer starts,
time measurement is cancelled and a new
one is started. Press again the SET button
(2) after 10 seconds have elapsed from
timer start, time measurement is stopped,
stored and a new one is started. Stop the
time measurement session by pressing the
SET (2) push-button for several seconds.
Acquisition ends as soon as 40 lap times
are stored; "FULL" is displayed. Stop the
vehicle, see page 54 (STOPPING) and
enter the VIEW TIMES function of the LAP
TIME menu to read the stored lap times.
Diagnosis
This function interfaces with the systems
fitted to the motorcycle to carry out
diagnosis. To enable it, you need a special
password only available to the aprilia
Authorised Service Centres .
Language
This function allows you to choose the
language of any message displayed.
Available options are:
-ITALIANO
-ENGLISH
-FRANCAIS
-DEUTSCH
-ESPANOL
Once the operation is over, the display
goes back to LANGUAGE menu.
use and maintenance RSV 1000 TUONO R
21