Removing The Battery - APRILIA RSV 1000 TUONO R Manual

If necessary, proceed as follows:
u Remove the battery, see page 96

(REMOVING THE BATTERY).

Brush the cable terminals (2) and the
u
battery terminals (3) with a wire brush, in
order to eliminate any trace of corrosion.
u Install the battery, see
(INSTALLING THE BATTERY).
96 use and maintenance RSV 1000 TUONO R
REMOVING THE BATTERY
When the battery is removed, the digital
clock and red line setting will be reset to
zero. To re-set these functions, see
page 98 p a g e 1 6
COMPUTER).
Carefully read page 95 (BATTERY).
u Make sure that the ignition switch is in
position "
u Remove the rider seat, see page 77
(REMOVING THE RIDER SEAT).
u Release and remove the negative (-)
terminal screw (1).
u Slide the negative lead (2) aside.
Lift the red protective cap (3).
u
CAUTION
( M U L T I F U N C T I O N
".
u Release and remove the positive (+)
terminal screw (4).
u Move aside the positive cable (5).
u Release and remove the two screws (6).
u Remove the battery retaining bracket (7).
u Grasp the battery (8) firmly and lift it out
of its mount.
WARNING
Once it has been removed, the battery
must be stored in a safe place and kept
away from children.
u Position the battery on a flat surface, in a
cool and dry place.
u Refit the rider seat, see page 77
(REMOVING THE RIDER SEAT).
NOTE
For the installation of the battery,
s e e p a g e 9 8 ( I N S T A L L I N G T H E
BATTERY).