APRILIA RSV 1000 TUONO R Manual page 87

FORK
Factory setting is designed for any riding
condition, low or high speed, with reduced
or full load.
However, suspension setting may be
m o d i f i e d t o s u i t s p e c i f i c n e e d s i n
accordance with vehicle use.
WARNING
For a correct setting of adjusters (1-2-3),
first set the fork to the stiffest position
(turn the adjuster fully clockwise) then
set desired position (clicks and/or
turns).
WARNING
2
Racing settings may only be used
during official competitions or sports
events authorised by the competent
authorities and taking place in closed
circuits or, anyway, away from public
roads.
It is strictly prohibited to carry out
adjustments for the use of the vehicle
on racetracks and then ride it on roads
or motorways.
FRONT SUSPENSION
Hydraulic adjustment with extended shock
absorber, screw (1)
Hydraulic compression damping, screw (2)
Spring preload, nut (3)
Fork height (A) (***) over top yoke (not
including top cap)
(*) = clockwise
(**) = anticlockwise
(***) = Have this adjustment carried out exclusively by an aprilia Authorised Dealer
For racing we recommend to fit the Öhlins multiadjustable front fork unit
the purchase contact an aprilia Authorised Dealer.
Standard setting
Tighten fully (*) and then slacken (**)
by 1.5 turns
Tighten fully (**) and then slacken (*)
1 turn
Tighten fully (*) and then slacken (**)
5 notches are in view
1 notches are in view
use and maintenance RSV 1000 TUONO R
. For
87