APRILIA RSV 1000 TUONO R Manual page 19

4
GEAR SHIFT INDICATOR
This function allows you to set the value for
the gear shift indicator threshold. As soon
as you enter this function, the display
shows "GEAR SHIFT INDICATOR" (if
English is the selected language) and the
rev. counter index indicates the threshold
value.
Briefly press the SET (2) push-button to
increase threshold value by 100 RPM.
Once the max. value has been reached,
press the push-button again to decrease
the value and vice versa.
Press the SET button (2) for several
seconds to complete the operation; the
display sets back to SETTINGS menu.
When battery is connected for the first
time, the instrument panel sets to running-
in rpm value, the next time battery is
connected it sets to last set value.
RUNNING-IN RPM: 6000
MINIMUM RPM: 5000
MAXIMUM RPM: 12000
When the set threshold is exceeded, the
alarm light (4) on the instrument panel
flashes until the value goes below the
threshold.
BACK LIGHTING
T h i s f u n c t i o n a l l o w s y o u t o s e t
backlighting: three levels are available. In
t h i s f u n c t i o n t h e d i s p l a y s h o w s
"BACKLIGHTING" and every time SET (2)
button is briefly pressed, the following
symbols are alternatively displayed:
-LOW
-MEAN
-HIGH
Press the SET button (2) for several
seconds to complete the operation; the
instrument panel sets back to SETTINGS
menu.
use and maintenance RSV 1000 TUONO R
19