Installing The Battery - APRILIA RSV 1000 TUONO R Manual

INSTALLING THE BATTERY

Carefully read page 95 (BATTERY).
u Make sure that the ignition switch is in
position " ".
u Remove the rider seat, see page 77
(REMOVING THE RIDER SEAT).
98 use and maintenance RSV 1000 TUONO R
3
N O T E
T h e b a t t e r y ( 1 ) m u s t b e
positioned in its compartment with the
terminals directed towards the upper part
of the vehicle.
u Put the battery (1) in its compartment.
u Refit the battery retaining bracket (2).
CAUTION
Pay special attention to correctly
position the bank angle sensor on the
battery bracket (2).
u Fit and tighten the screws (3).
WARNING
Upon reassembly, connect first the
positive cable (+) and then the negative
cable (–).
6
2
1
u Connect the positive terminal (+) by
means of the screw (4).
u Connect the negative terminal (–) by
means of the screw (5).
u Coat the terminals of cables and battery
with neutral grease or Vaseline.
u Refit the red protective cap (6).
u Refit the rider seat, see page 77
(REMOVING THE RIDER SEAT).
When the battery is removed, the digital
clock and red line setting will be reset to
zero. To re-set these functions, see
p a g e 1 6
COMPUTER).
4
5
CAUTION
( M U L T I F U N C T I O N