Inspecting The Front And Rear Suspensions - APRILIA RSV 1000 TUONO R Manual

14 13 12
15
Driving torque of screws (11) and (13):
40 Nm (4 kgm).
u Unscrew and remove the screw (11) and
collect the washer (12).
u Unscrew and remove the screw (13)
while holding the nut (15) at the rear end
with a spanner.
Remove the stand (1) complete with:
u
– springs (2),
– bracket (3);
– stand switch (4).
u Refit the screw (13), the washer (14) and
the nut (15) and tighten to the specified
torque.
11
NOTE
Store away the complete stand,
the screw (11) and the washer (12)
together. In this way, you will be able to
refit them correctly when you intend to use
the vehicle on public roads.
u Refit the left side fairing, see page 78
(REMOVING THE SIDE FAIRINGS).
INSPECTING THE FRONT AND
REAR SUSPENSIONS
C a r e f u l l y r e a d
(MAINTENANCE).
NOTE
Have the front fork oil changed by
an aprilia Authorised Dealer, for
guaranteed accurate, prompt service
NOTE
Halve maintenance intervals if
the vehicle is used in rainy or dusty
conditions, on rough roads or for racing.
Have the front fork oil changed after the
first 10000 km (6250 mi) and then every
20000 km (12500 mi).
Carry out the following checks after the first
1000 km (625 mi) and every 10000 km
(6250 mi) afterwards:
use and maintenance RSV 1000 TUONO R
p a g e 5 8
85