Figure 353 Maintenance > Diagnostics; Table 206 Maintenance > Diagnostics - ZyXEL Communications ZYWALL 35 User Manual

Chapter 32 Maintenance
Figure 353 MAINTENANCE > Diagnostics
The following table describes the labels in this screen.
Table 206 MAINTENANCE > Diagnostics
LABEL
Enable Diagnostics
Perform Diagnostics
Now
Perform Diagnostics
when CPU utilization
exceeds
Periodic Diagnostics
Diagnostics Frequency
Day for Diagnostics
Time for Diagnostics
590
DESCRIPTION
Select this option to turn on the diagnostics feature.
Click this button to generate and send a diagnostic e-mail immediately,
instead of based on a time period or CPU usage level.
Set the ZyWALL to generate and send a diagnostic e-mail every time the
CPU usage goes over the specified percent for more than 60 seconds. Enter
0 to have the ZyWALL not generate and send diagnostic files based on CPU
usage going over a specific level.
Use these fields to set the ZyWALL to generate and send diagnostic e-mails
at regular intervals.
Even if you enable both CPU utilization-based and periodic diagnostics, the
ZyWALL only sends one diagnostic e-mail within five minutes (unless you
click Perform Diagnostics Now).
Set how often the ZyWALL generates and sends diagnostic files.
Hourly
Daily
Weekly
None.
If you select Daily or Weekly, specify a time of day for the ZyWALL to
generate and send diagnostic e-mails. If you select Weekly, then also
specify which day of the week. Select None to have the ZyWALL not
generate and send diagnostic e-mails based on a time period.
Use the drop down list box to select which day of the week to generate and
send diagnostic files.
Enter the time of day in 24-hour format (for example 23:00 equals 11:00 pm)
to generate and send diagnostic files.
ZyWALL 5/35/70 Series User's Guide