Query View; Figure 164 Security > Idp > Signature: Query View; Table 82 Security > Idp > Signature: Query View - ZyXEL Communications ZYWALL 35 User Manual

Chapter 13 Configuring IDP
Table 81 SECURITY > IDP > Signature: Group View (continued)
LABEL
Apply
Reset

13.3.5 Query View

Click IDP > Signature to see the ZyWALL's "group view" signature screen, then click the
Switch to query view link to go to this 'query view" screen.
Use this screen to search for signatures by criteria such as name, ID, severity, attack type,
vulnerable attack platforms, whether or not they are active, log options, alert options or
actions.
Figure 164 SECURITY > IDP > Signature: Query View
The following table describes the fields in this screen.
Table 82 SECURITY > IDP > Signature: Query View
LABEL
Back to group
view
Signature Search
Signature Search
by Attributes
286
DESCRIPTION
Click this button to save your changes back to the ZyWALL.
Click this button to begin configuring this screen afresh.
DESCRIPTION
Click this button to go to the IDP group view screen where IDP signatures are
grouped by attack type.
Select this to search for a specific signature name or ID (that you already know).
Then select whether to search the signatures by name or ID. Then enter the name
(or part of the name) or the complete ID number of the signature(s) that you want
to find.
Select this to search for signatures that match the criteria that you specify. Then
select the criteria to search for. Hold down the [Ctrl] key if you want to make
multiple selections from a list of attributes.
ZyWALL 5/35/70 Series User's Guide