Table 269 Firmware Specifications - ZyXEL Communications ZYWALL 35 User Manual

Chapter 54 Product Specifications

Table 269 Firmware Specifications

FEATURE
Default IP Address
Default Subnet Mask
Default Password
Default DHCP Pool
Device Management
Wireless Functionality
Firmware Upgrade
Configuration Backup &
Restoration
Network Address
Translation (NAT)
Port Forwarding
DHCP (Dynamic Host
Configuration Protocol)
Dynamic DNS Support
IP Multicast
IP Alias
Time and Date
Logging and Tracing
PPPoE
PPTP Encapsulation
Universal Plug and Play
(UPnP)
RoadRunner Support
758
DESCRIPTION
192.168.1.1
255.255.255.0 (24 bits)
1234
192.168.1.33 to 192.168.1.160
Use the web configurator to easily configure the rich range of features on
the ZyWALL.
Allow the IEEE 802.11b and/or IEEE 802.11g wireless clients to connect
to the ZyWALL wirelessly. Enable wireless security (WEP, WPA(2),
WPA(2)-PSK) and/or MAC filtering to protect your wireless network.
Download new firmware (when available) from the ZyXEL web site and
use the web configurator, an FTP or a TFTP tool to put it on the
ZyWALL.
Note: Only upload firmware for your specific model!
Make a copy of the ZyWALL's configuration. You can put it back on the
ZyWALL later if you decide to revert back to an earlier configuration.
Each computer on your network must have its own unique IP address.
Use NAT to convert your public IP address(es) to multiple private IP
addresses for the computers on your network.
If you have a server (mail or web server for example) on your network,
you can use this feature to let people access it from the Internet.
Use this feature to have the ZyWALL assign IP addresses, an IP default
gateway and DNS servers to computers on your network.
With Dynamic DNS (Domain Name System) support, you can use a
fixed URL, www.zyxel.com for example, with a dynamic IP address. You
must register for this service with a Dynamic DNS service provider.
IP multicast is used to send traffic to a specific group of computers. The
ZyWALL supports versions 1 and 2 of IGMP (Internet Group
Management Protocol) used to join multicast groups (see RFC 2236).
IP alias allows you to subdivide a physical network into logical networks
over the same Ethernet interface with the ZyWALL itself as the gateway
for each subnet.
Get the current time and date from an external server when you turn on
your ZyWALL. You can also set the time manually. These dates and
times are then used in logs.
Use packet tracing and logs for troubleshooting. You can send logs from
the ZyWALL to an external syslog server.
PPPoE mimics a dial-up Internet access connection.
Point-to-Point Tunneling Protocol (PPTP) enables secure transfer of
data through a Virtual Private Network (VPN). The ZyWALL supports
one PPTP connection at a time.
A UPnP-enabled device can dynamically join a network, obtain an IP
address and convey its capabilities to other devices on the network.
The ZyWALL supports Time Warner's RoadRunner Service in addition
to standard cable modem services.
ZyWALL 5/35/70 Series User's Guide